Dongguan Mingbo Automation Equipment Co., Ltd.

Dongguan Mingbo Automation Equipment Co., Ltd.

Alibaba  |   |  EN

Note on using paper tube equipment

Source:Release time:2018-11-28 16:05:27Click through rate:

RSS订阅l m s

If you don't know what you need to pay attention to, here are some things to keep in mind when using a paper tube device.




1. Before using the paper cutting tube equipment or using the paper cutting tube equipment, it is necessary to pay attention to the pressure line size and branch size of the paper cutting tube equipment and the same as described on the work order, so that it can be avoided because the pressure line size does not match. This causes the paper tube device to fold, break, and have some extra line marks on the paper tube.




2. Before using the paper cutting tube equipment, be sure to run the operation panel of the paper cutting tube equipment or the controller of the paper cutting tube equipment for 30 seconds. If there is no abnormality, you can use it after using the paper cutting tube equipment. Push out a piece of cardboard with both hands and turn off the power to the cutting tube unit.




3. When cleaning the paper-cutting tube equipment, the paper-cutting tube equipment must be stopped before cleaning, and it is also necessary to confirm whether there are some residual substances inside the paper-cutting tube equipment, and if so, the paper-cutting tube equipment will be The paper cutter is called up with the operation panel and then taken out. Next, you only need to clean up the surface of the paper tube equipment and the surrounding debris to clean it up.




4. If you want to cut the paper tube device after adjusting the equipment inside the paper tube equipment or adjust it, you can adjust it because there is no stop to adjust the paper tube device, it will make the value suddenly change during operation. The paper tube device cuts or breaks the paper sheet.