Source:Release time:2018-11-27 17:13:25Click through rate:
Nowadays, paper pipe suction machines are widely used in the market. In order to meet the market demand, manufacturers have hired more operators to produce paper pipe suction machines in order to improve the production efficiency of paper pipe suction machines. The equipment should be operated strictly according to the working principle during the operation process, otherwise there will be dangerous situations. Let us understand the working principle of the paper suction machine.
When the operator prepares to operate the paper pipe suction machine, the protective equipment that needs to be worn should be worn neatly. The protective protective cap must be wrapped with the hair. Otherwise, some operators with long hair should have the paper suction machine. It may cause the hair to be too long to be twisted into the paper pipette machine, and the consequences are very dangerous. Of course, in addition to wearing neat protective work, some equipment is strictly forbidden to wear when using a paper suction machine. Any operator can not wear gloves when operating the paper suction machine, which is very easy to happen when operating the paper suction machine. The gloved hand is twisted into the rotating part of the paper pipette machine, causing injury to the human body.
After the operator is neatly dressed, first check the safety of the paper pipe suction machine, first run the empty car, check whether the paper pipe suction machine can run normally, and then check whether the items that need to be fastened by the paper pipe suction machine are firmly installed, not loose. It includes the tools to be used and the parts to be processed. It is confirmed that all normal conditions can be used for normal work. If a malfunction occurs, the paper pipette machine cannot be forced to start for work efficiency, which is extremely prone to accidents and the consequences are unimaginable. Each paper suction machine has mechanical safety devices on it. When confirming the start of the paper suction pipe machine, the operator must confirm that the mechanical safety equipment is installed properly and can be used normally. Only the starter paper suction machine can be confirmed. It is strictly for the convenience of the operator. Remove mechanical safety equipment or do not activate mechanical safety devices while operating the paper suction machine.
After the operator starts the paper suction machine and the paper suction machine is put into operation, the operator must observe the operation of the paper suction machine and cannot leave his job position in advance. When the paper suction machine fails, the operator does not perform manual disposal in time. Of course, during the operation of the paper pipette machine, the operator can not directly adjust the hand when the fault occurs, or add a series of operations such as lubricating oil and cleaning debris to the paper pipe suction machine, but the paper pipe cutter should be closed first. In order to adjust the paper pipette machine.
Until the operation of the entire paper pipette machine is completely completed, the operator needs to close the paper pipe suction machine, and then remove all the processed articles and tools from the paper pipe suction machine, and place the tools and other components in the tool box. The cleaning of the paper pipette and the cleaning of the environment near the paper pipetting machine are carried out.